Choosing a high-quality can sealing machine can ensure that the can sealing machine products you choose can ensure that the air duct effect is remarkable when sealing cans. Sealing machine products can ensure good sealing applications in many current fields.
​​
Sealing machine products are not suitable for metal container air ducts in use, and cannot be imitated on metal countertops. If they are placed on metal countertops to start the can sealing, it will inevitably cause damage to the machine. Be sure to insert the inductive plug and tighten the screw before turning on the power. When using the power cord, in order to ensure the safety of the operator, a three-wire power socket should be used, and the ground must be dry, so as to have a good insulation effect.
​​
In the process of sealing the can, you should always pay attention to the abnormal protection indicator. When the yellow light is on, you must cut off the power in time. After the buzzer in the machine stops, continue to work. During the operation of the sealing machine, the surface of the induction head should be checked frequently. Once an overheating reaction occurs, the operation should be stopped in time, and the construction should be carried out after cooling.
​​
Any machine of the can seaming machine will fail during long-term use, and the can seaming machine is no exception. So, what are the common faults of the can seaming machine?
1. If the sealing is not strong enough, the air is easy to enter the product, which will shorten the shelf life of the product, cause losses to the manufacturer, and bring risks to the consumers who buy the product. Therefore, the poor sealing is a very important fault of the sealing machine. Most of this happens because the pressure of the cold-pressed rubber wheel is not suitable, the heat-sealing speed is too fast or the temperature is not enough. At this time, it is only necessary to increase the heat-sealing temperature, and then reduce the heat-sealing speed. At the same time, increase the cold-pressing glue force pressure.
2. Irregular marks appear on the sealing cans, which is also a common fault, because there are many irregular bump marks on the cold pressing glue machine. It will stick to the can sealer and cause uneven heating of the can sealer, resulting in air bubbles. The way to deal with this kind of failure is very simple, we only need to clean the sealing machine regularly or replace the cold pressing machine.