The can sealing unit is suitable for filling and sealing of steamed cans in the beer and beverage industry. unit. Filling and sealing are designed as a whole, and the power of the filling system of the can sealing machine is provided by the sealing system to ensure the absolute synchronization and coordination of the two. It adopts the most advanced mechanical, electrical and pneumatic control technology at present, and uses the principle of iso-pressure filling. The filling speed is fast, the liquid level is stable after filling, and the material loss is small, the sealing quality is good, the whole machine runs smoothly, and the shape is beautiful and generous. , Easy operation and maintenance, production speed frequency control and other characteristics.
​​
Precautions for daily maintenance of can sealing machine:
First, the can sealing machine adjusts the distance between the can tray and the pressure head: loosen the spare cap on the guide shaft (screw) at the lower end of the can tray, rotate the can tray, take the contact between the pressure head and the cover as the base point, and then Rotate the can tray up by 2---3mm, and fasten the spare cap.

Second, adjust the distance between the pressure head and the sealing wheel: firstly adjust the left and right distance between the pressure head and the first sealing wheel, based on the distance between the sealing wheel and the pressure head 0.5mm, the pressure head and the sealing wheel do not rub against each other , the smaller the distance, the better; adjust the upper and lower distance between the pressure head and the first sealing wheel, and the minimum gap between the lower end of the sealing wheel and the upper end of the pressure head shall prevail. Next, adjust the distance between the pressure head and the second sealing wheel in the same way.

Third, the gap between the pressure head of the can sealing machine and the sealing wheel: it can be adjusted according to the hardness of the cover. The iron cover can be adjusted closer. The aluminum cover can be adjusted farther. After the adjustment, tighten the fixing screws and try to seal 2-3 pieces. After checking that the standard is met, it can work continuously.

Fourth, every time the tank type is changed, the pressure head and the tank tray need to be replaced according to the size of the lid.

Fifth, mechanical maintenance: the motor is indispensable, the gear transmission part is added with lithium-based lubricating oil once a month, the main shaft of the motor is running but the tank tray does not lift, adjust or replace the V-belt.