Liquid filling, plugging and sealing machines are widely used in the market. It is time-saving and efficient, and has won unanimous recognition from consumers. Nowadays, most packaging companies are using liquid filling, plugging and sealing machines, which replace manual and whole machine operations. , is an intelligent U device in the new era, but any device will be damaged or worn after a long time of use, and the liquid filling, plugging and sealing machine is no exception. What should I do if the capping head of the liquid filling, plugging and sealing machine is loose? 

​​
Treatment method of liquid filling, plugging and sealing machine when it is tight and loose when screwing the cap:
1. Connect the power cord of the capping machine to the power box;
2. Connect the power supply, the power box indicator light is on;
3. Hold the bottle cap on the bottle mouth with your left hand;
4. Hold the capped bottle with your left hand;
5. Hold the capping machine firmly with the right hand, and align the capping head vertically with the cap;
6. Press the start switch on the filling and capping machine with the index finger of the right hand, and press down at the same time until the clutch of the filling and capping machine is automatically clutched and makes a sound of "da da...". According to the tightness of the capping machine, the capping head Don't press too hard.
7. Adjusting the tightness of the bottle cap can be achieved by adjusting the torque adjustment nut between the screw head and the rotary machine. The larger the torque, the tighter the bottle cap is, and the smaller the torque when the bottle cap is screwed. looser.